top of page

Finish

12-1, Sanding the bases
I examine each piece individually to check for defects such as cracks and "furimono". "Furimono" refers to ash or foreign matter that fell from the kiln ceiling or elsewhere during firing and become fused to the pieces. Depending on the situation, I may reject these pieces.

I lightly sand the bases of the pieces with coarse-grit sandpaper.
12-2, Coating the tableware
Fired clay has fine pores and is naturally absorbent. Even when glazed, if there is "crazing" (fine crackle patterns in the glaze), moisture and oil can seep into these crazings.

Over many years of use, these absorbed substances may stain the pieces, creating a unique patina that can be appreciated as part of the piece’s character. If I prefer to preserve the appearance of the fired piece for a long time, I coat them with a waterproofing agent that’s safe for use on tableware.

I decide whether or not to coat a piece based on my judgment of the piece.
Coating the vase
To prevent the bottom of the vases from getting damp or developing mold,  I apply silicone to the inside of the vases to make it waterproof.
12-3, Installing parts
Wall-mounted pieces. I attach a wood board to the back of the piece with glue and install wall-mounting hardware rated for the piece’s weight.​ Depending on the piece, I may also create a hole for threading a cord.

Lighting pieces. There are various types of lighting fixtures, and I need to decide what kind of pieces are needed during the design process. I assemble the pieces and attach them using screws, clips, and other methods. 

​​Assembled pieces. I secure the piece’s components to a base using wire and glue.

Caring for Tableware

Before using the tableware for the first time...
Fired clay has fine pores and is naturally absorbent. Even when glazed, if there is "crazing" (fine crackle patterns in the glaze), moisture and oil can seep into these crazings.

Over many years of use, these absorbed substances may stain the pieces, creating a unique patina that can be appreciated as part of the piece’s character. If I prefer to preserve the appearance of the fired piece for a long time, I coat them with a waterproofing agent that’s safe for use on tableware.

I decide whether or not to coat a piece based on my judgment of the piece.

For pieces that are not coated, sealing the pores in advance makes them less prone to staining. To seal the pores on your pieces, you can immerse the pieces in a pot filled with rice washing water, bring the pot to a boil, and then let it simmer for about 20 minutes. Let the pot and pieces cool naturally, remove the pieces, wash and dry them thoroughly, and then store them in a cupboard for future use.



MEMO

・When using a casserole dish for the first time, first cook rice porridge in it.
・Porcelain is made by firing fine-grained clay at high temperatures of nearly 1,300°C, so it has no pores and is resistant to staining after firing.
​How to care for tableware in daily life
My ceramics are fired at a relatively high temperature, but they are not fired as high as porcelain. I recommend carefully washing them by hand with a soft sponge.

Be sure to let them dry thoroughly before storing them in a cupboard. If they are still damp, it can lead to the growth of mold.

If tea stains or other marks become noticeable, you can remove them with chlorine bleach.




MEMO

・For Yakishime (unglazed) pieces, rinsing them under water before each use helps prevent stains from seeping into the pores, making them less prone to staining and giving them a rich, dewy look.
Gold, silver and palladium-decorated ceramics
Pieces decorated with gold or silver should not be used in the microwave. When washing them, hand-wash them with a soft sponge.

​Silver tends to tarnish with age. You can remove this tarnish by applying a mixture of baking soda and water to a cloth and wiping the surface gently.
  • Instagram
Ari's Art Works in Kanagawa
bottom of page